- Posts: 46
- Thank you received: 0
Tech Boot Repair
- john green
- [john green]
- Topic Author
- Offline
- New Member
Is there a shop in the region that can repair this? Maybe remove the broken inserts and press in new ones?
Thanks for any info.
Please Log in or Create an account to join the conversation.
- kamtron
- [kamtron]
- Offline
- Senior Member
- Posts: 268
- Thank you received: 8
If that doesn't work, I know that Cast touring can install inserts into alpine boots and might be able to repair: casttouring.com/
Locally you could try Pro Ski in North Bend or cobbler Dave Page, but they might not be able to help.
Please Log in or Create an account to join the conversation.
- john green
- [john green]
- Topic Author
- Offline
- New Member
- Posts: 46
- Thank you received: 0
I'll try Ski Pro, but do you have any contact info for cobbler Dave Page?
And Cast Touring is another interesting option--thanks!
Please Log in or Create an account to join the conversation.
- kamtron
- [kamtron]
- Offline
- Senior Member
- Posts: 268
- Thank you received: 8
Please Log in or Create an account to join the conversation.
- E_N
- [E_N]
- Offline
- New Member
- Posts: 27
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- bwalt822
- [bwalt822]
- Offline
- New Member
- Posts: 48
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- Charlie Hagedorn
- [trumpetsailor]
- Offline
- Elite Member
- Posts: 913
- Thank you received: 1
Boot manufacturers have a lot on the line with their insert metallurgy; there's a lot of mechanical stress on those little guys.
Please Log in or Create an account to join the conversation.
- Jake the Brit
- [Jake the Brit]
- Offline
- Junior Member
- Posts: 70
- Thank you received: 0
OOps, just read the thread. Yes you already knwo this.
If you want to do it yourself CAST will send you the inserts for 40 or 50 bucks. You need to pull off the rubber sole or grind it away, hope the CAST insert frame is the same size as the originals, if not I have a router pattern that you can borrow, then rout out the cavity, bolt the inserts straight through the sole & have Dave Page re-sole.
..ha, get someone else to do it. Unless you're a die hard diy'er
Please Log in or Create an account to join the conversation.
- Randito
- [Randito]
- Offline
- Elite Member
- Posts: 960
- Thank you received: 1
Scarpa was out of stock of all the Alien 1.0 shells at that point in the year -- but they did sent me a new pair of regular Alien shells and offered to sell me a new pair of Alien 1.0 in the fall at wholesale.
Please Log in or Create an account to join the conversation.
- kamtron
- [kamtron]
- Offline
- Senior Member
- Posts: 268
- Thank you received: 8
Those guys are based out of Driggs, ID. They're my buddies from Mad River Glen days.CAST touring in Colorado have the parts & the know-how to install new inserts.
Please Log in or Create an account to join the conversation.
- skykilo
- [skykilo]
- Offline
- Senior Member
- Posts: 304
- Thank you received: 0
But in your boots it's actually the metal that is broken?
It's sad to hear that La Sportiva isn't highly responsive since your boots probably weren't cheap.
Please Log in or Create an account to join the conversation.
- john green
- [john green]
- Topic Author
- Offline
- New Member
- Posts: 46
- Thank you received: 0
Sorry I don't have a pic for you, but the damage is a small round hole, pretty much as if I'd somehow stomped on the binding with the boot at enough of an angle that the binding peg actually pierced the edge of the tech fitting, above the hole (I don't remember doing this). The hole is now wider at the top, and there is a little damage to the plastic just above the tech hole.
What this means is that the boot wobbles in the binding just a bit. I can still use these boots in a non-tech binding like the Marker Lord SP, and they still work in uphill mode, but there is a fair amount of edging strength lost.
I love the performance of these boots but I'm dismayed at the lack of customer support. I know the market for uphill equipment is highly specialilzed, but I assumed the high prices meant they could afford to stand by their products.
Please Log in or Create an account to join the conversation.
- Jonathan_S.
- [Jonathan_S.]
- Offline
- Senior Member
- Posts: 290
- Thank you received: 0
And to remove the damaged interface from your boots, you would need to slice open the plastic that encompasses the Tech interface (i.e., as opposed to merely peeling back rubber as was previously suggested).
Then you would need to find a replacement interface that has exactly the same pattern/link between the two dimples.
And finally come up with a way to seal up the plastic strong enough to withstand all the forces while skinning and skiing.
(This final element was the problem with a bad batch of Dynafit Zzero4 boots as previously referenced in this thread: the interface was fine, but the plastic could crack around the interface.)
Please Log in or Create an account to join the conversation.
- Jake the Brit
- [Jake the Brit]
- Offline
- Junior Member
- Posts: 70
- Thank you received: 0
Here's what a CAST thingy looks like.
That is not a ski boot, it's an old Scarpa Omega, I don't know anything at all about skiing. I hear it's fun having those 2 sticks, one on each foot!
Please Log in or Create an account to join the conversation.
- Jim Lamb
- [Jim Lamb]
- Offline
- New Member
- Posts: 6
- Thank you received: 0
The Mountain Shop
Oregon Mountain Community
US Outdoor Store
Please Log in or Create an account to join the conversation.
- Chris S
- [mtnfreak]
- Offline
- Junior Member
- Posts: 91
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- Mr_Burns
- [Mr_Burns]
- Offline
- New Member
- Posts: 4
- Thank you received: 0
Long story short- I went through all the same channels you did with no luck. I ended up buying an identical pair of boots used. I now have three good shells, four good liners, and a boatful of extra buckles, etc.
Somewhere I heard Sportiva does not use "official" Dynafit inserts. Maybe the metal is crap or something like that.
As for that "repair" scheme, I'm not sure I'd trust it. The whole tech binding scheme is based on those tiny pins, and I think it's super important that the fitting is molded into the shell. I don't know why such soft metal is used for the insert. Not a good place to save fractions of an ounce in my mind.
Please Log in or Create an account to join the conversation.
- steddy
- [steddy]
- Offline
- New Member
- Posts: 6
- Thank you received: 0
Jeezum. Hardly used and I'm not that dumb stepping in. Clues and failure happened in the course of one day; could tell something was clicking on one side and finally saw that my toe was pressuring through the binding past the wing; no sign of it previously.
Please Log in or Create an account to join the conversation.
- john green
- [john green]
- Topic Author
- Offline
- New Member
- Posts: 46
- Thank you received: 0
I love the performance of those boots but currently the company is not standing by them--I bought a second pair as did a prev poster.
I called OMC in Portland and they were no help either. I was well within warranty and they just told me good luck.
Please Log in or Create an account to join the conversation.
- peteyboy
- [peteyboy]
- Offline
- Junior Member
- Posts: 162
- Thank you received: 0
Reliability is made up of construction and customer service.
Thanks fellas. You just saved me from ever buying outstanding-performing La Sportiva boots. Good luck. You deserve better.
Please Log in or Create an account to join the conversation.
- Chris S
- [mtnfreak]
- Offline
- Junior Member
- Posts: 91
- Thank you received: 0
I called OMC in Portland and they were no help either. I was well within warranty and they just told me good luck.
Please don't hate on OMC for this, especially if you didn't purchase the boot from them. Even if you had, after hearing your story, do you think they wanted to swallow a $700 loss? Because if La Sportiva wasn't going to honor their warranty with you, they sure as hell weren't going to honor the warranty through a retail shop either.
It sucks what has happened here, but like we've all observed it seems to be a problem with La Sportiva.
Please Log in or Create an account to join the conversation.
- AlpineRose
- [AlpineRose]
- Offline
- Junior Member
- Posts: 113
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- bwalt822
- [bwalt822]
- Offline
- New Member
- Posts: 48
- Thank you received: 0
Did you end up hearing anything from La sportiva? I sent them an email linking to this thread and saying that they wouldn't be getting my business in the future if they didn't stand behind their products. They replied "Perhaps, while reading this post, it as not as obvious but of course there are usually two sides to every coin. Our Warranty team provided exceptional customer service to this individual and after finally having the chance to review the boots under warranty made exceptions to replace the boot, even though the issue was not a manufacturing defect, but rather normal wear and tear, if not improper use"
Not sure how this failure could be normal wear and tear within one year even if you skied them every day for the full year. How could this be caused by improper use? Ice in the holes and not locking the toe piece down enough to force it out?
Please Log in or Create an account to join the conversation.
- john green
- [john green]
- Topic Author
- Offline
- New Member
- Posts: 46
- Thank you received: 0
Please Log in or Create an account to join the conversation.